| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model Name | VE 10 EN | VE 10 CN 24' | ||
| Item | Specification | Unit | ||
| Processing Range | X-axis Travel | mm | 1050 | 1050 |
| Y-axis Travel | mm | 600 | 600 | |
| Z-axis Travel | mm | 600 | 600 | |
| Distance from Spindle End Fave to Table | mm | 120-720 | 120-720 | |
| Distance from Spindle Center to Column Guide Surface | mm | 636 | 636 | |
| Table | Worktable Size | mm | 550*1100 | 550*1100 |
| Max. Worktable Load | kg | 800 | 800 | |
| T-Slot | No. | 5 | 5 | |
| T-Slot Size/Spacing | mm | 18*110 | 18*110 | |
| Other Attributes | ||||
| Item | Specification | Unit | ||
| Spindle | Drive Type | / | Direct Drive | Direct Drive |
| Spindle Speed | rpm | 8000(standard)/10K/12K/15K(optional) | 8000(standard)/10K/12K/15K(optional) | |
| Spindle Motor Power | kw | 11 | 11 | |
| Maximum Spindle Torque | Nm | 120 | 120 | |
| Spindle Dimension and Specification | / | ISO 7/24 Taper NO.40 | ||
| Servo Axes | Rapid movement for X, Y, and Z axes | m/min | 48/48/36 | 48/48/36 |
| X, Y, and Z servo motor drive modes | / | Direct drive linkage | Direct drive linkage | |
| X, Y, and Z servo motor speeds | rpm | 3000 | 3000 | |
| The diameter of the screws for the X.Y, and Zaxes | mm | Φ40/Φ40/Φ40 | Φ36/Φ36/Φ30 | |
| The pitch of the screws for the X, Y, and Z axes | mm | 16/16/16 | 12/12/12 | |
| The cutting feed rate | mm/min | 1-10000 | 1-10000 | |
| Minimum Feed | mm | 0.001 | 0.001 | |
| Tool Magazine | Tool Magazine Capacity | No. | 24 | 24 |
| Tool Magazine Type | / | Disc Type Mechanical Arm | Disc Type Mechanical Arm | |
| Tool Shank Specification | / | BBT-40 | BBT-40 | |
| Tool Shank Bolt | / | P-40T(45°) | P-40T(45°) | |
| Tool Magazine Maximum Too| Diameter | mm | Φ80 | Φ80 | |
| Maximum Tool Diameter (No Adjacent Tools) | mm | Φ150 | Φ150 | |
| Maximum Tool Length | mm | 300 | 300 | |
| Maximum Tool Weight | Kg | 8 | 8 | |
| Tool Change Time (Tool-to-Tool) | Sec | 2 | 2 | |
| Main Precision | Positioning Accuracy | mm | ±0.005 | ±0.005 |
| Repeat Accuracy | mm | ±0.003 | ±0.003 | |
| Others | Machine Weight (Including Water Tank) | (Approx.)Kg | 5.8 | 5.8 |
| Floor Space Requirement (Including Water Tank) | mm | 2720*3350 | 2720*3350 | |
| Machine Height | mm | 2650 | 2650 | |
| Others Power Capacity | KVA | 25 | 25 | |
| Lubrication Tank Capacity | L | 4 | 4 | |
| Coolant Capacity | L | 350 | 350 | |
| Air Supply Pressure Bar | Bar | 6~8 | 6~8 | |
| Numerical Control System | Siemens 828D | Siemens 828D | ||
Bed, Column And Saddle
The bed, column, and saddle are composed of Meehanite HT300 grade cast iron, which includes very high dampening characteristics. The one piece bed casting and column are stress relieved to ensure machine geometry is maintained throughout the life. Wide spacing of the linear guideways ensures optimal support for the table and saddle in full travel of each axis. Heavily ribbed castings provide superior dampening for high speed machining and aggressive milling. The mating surfaces of all critical contact points including the column, linear bearing blocks, linear guideways, and table surfaces are fully ground to optimize fit and accuracy.
Guide ways
The X, Y, & Z-axis are standard with heavy-duty 45mm linear guideways. All the guideways are placed against ground shoulders to maximize rigidity and geometry.Spindle
The permanently greased spindle bearings require no maintenance. The 8,000 rpm spindle is driven by a (7.5/11kW) AC servo motor. 15,000 rpm spindle is an option,upgrade toVE10IL. The four 70mm ceramic spindle bearings help with the concern of thermal growth on the 15,000 rpm spindle.Ball Screws And Axis Drives
Each axis is driven using a high precision, fully ground ball screw. All the ball screws are supported on using angular contact thrust bearings and are perfectly centered between the linear guideways. The 40mm ball screws are driven directly using direct-coupled AC servo type drive motors eliminating vibration, noise, and backlash.
Fully Enclosed Machine Enclosure
The machine enclosure is made of heavy duty sheet metal to contain the chips and coolant. The entire machine is fully enclosed. The removable side doors allow direct access to the inside of the machine. The front door opening (40") allows for easily loading and unloading of work pieces.
Flood Coolant System
A dedicated flood pump provides high volume coolant to the machine tool. The coolant enters the head casting and exits through the bottom of the spindle to help control thermal growth. The mounted nozzles are fully adjustable to accommodate various tool lengths. The 200 L coolant tank provides adequate capacity for any application.
Lubrication
Automatic lubrication is provided to the linear guideways and ball screws via way oil. Oil is delivered by metered valves, which precisely control the volume. A low-level alarm on the CNC warns the user preventing possible damage to the guideways and ball screws.
){kind=link}