| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Item | Unit | Specification |
| Table | |||
| 1 | Table size (L*W) | MM | 2600*600 |
| 2 | T-Slot (Size*Distance*Number of Slots) | MM | 18×100×5 |
| 3 | Max. Table Loading | KG | 1500 (Average) |
| Travel | |||
| 4 | X Axis | MM | 2200 |
| 5 | Y Axis | MM | 550 |
| 6 | Z Axis | MM | 600 |
| 7 | Spindle Nose to Table | MM | 100-600 |
| 8 | Linear Guide Width | MM | X: 45 (roller) 6-slide; Y: 45 (roller) 6-slide; Z: 45 (Roller) 6-slide |
| Spindle | |||
| 9 | Spindle taper | SK40 | |
| 10 | Spindle speed | R.P.M | 8000 rpm |
| 11 | 0.001°vertical turntable at any angle | ||
| 12 | Table diameter | Φmm | 255 |
| 13 | Center height | mm | 220 |
| 14 | Spindle hole | Φmm | 75 |
| 15 | Guide key width | mm | 18 |
| 16 | Allowed weight | kg | 370 |
| Tool Changer | |||
| 17 | Tool change type | Disc (left & right) | |
| 18 | Tool Capacity | tools | 60 (30 on each) |
| 19 | Max. tool weight | kg | 6 |
| 20 | Tool change time | sec | ≤7 |
| Feed | |||
| 21 | Cutting speed | MM/min | 1~ 20000 |
| 22 | Feed rate | MM/min | 32/32/32 |
| Accuracy | |||
| 23 | Positioning accuracy | MM | ±0.01 |
| 24 | Repeat Positioning Accuracy | MM | ±0.005 |
| Spindle motor | |||
| 25 | Rated power | kw | 18.5/22KW, 118NM |
| 3-axis Servo Motor | |||
| Ball screw/ Optional 3M rack drive for X-axis | |||
| 26 | Ball screw diameter/distance | MM | X: Φ40/16 |
| Y: Φ40/16 | |||
| Z: Φ40/16 | |||
| 27 | Chip removal method | Flushing (front screw chip removal) | |
| Other | |||
| 28 | Power requirement | 3Ф380V / 50HZ / 20KVA | |
| 29 | Required air pressure | MPa | 0.6 |
| 30 | Cooling motor power | KW | ≥2.0 |
| 31 | Machine net weight | Kg | 7200 |
| 32 | Machine size (L*W*H) | mm | 4350*3860*2800 |
| 33 | Machine color (sheet metal) | (RAL7035, according to buyer's color request) | |
| Standard Accessories | |
| No. | Items |
| 1 | Full protective sheet metal for the processing area |
| 2 | Working indicator light |
| 3 | Centralized automatic lubrication system |
| 4 | Spindle air seal |
| 5 | Work light (LED) |
| 6 | 8000 rpm belt-driven spindle |
| 7 | Linear roller guide rails |
| 8 | Cooling pump |
| 9 | CF card program storage |
| 10 | Coolant water tank |
| 11 | Air gun, spindle blowing fan |
| 12 | Electrical control cabinet heat exchange device |
| 13 | Lubricating oil pump |
1. The machine tool is featured with a moving column structure, capable of 3-axis manufacturing, with optional installation of four-axis or five-axis, enabling drilling, milling, tapping, boring, and other processing for various types of products.
2. The entire machine adopts high-quality HT300 castings, undergoing secondary tempering and natural aging treatment to eliminate internal stresses.
3. The base is made of a single-piece casting, providing the most stable load-bearing capacity. Coupled with a water tray design, cutting fluid does not leak externally.
4. It includes an oil-water separation device and cutting fluid filtration function
5. Mechanical Drive Spindle: Assembled with P4 grade bearings to ensure low vibration at all speeds. Comes standard with direct mechanical spindle, and optional belt drive or integrated electric spindle.
6. Concealed Pipeline: Prevents cutting fluid erosion of pipelines by iron filings.
7. Standard equipped with BBT50 high-speed mechanical spindle, with automatic tool release and clamping. Tool change can be done with the standard 24-position tool magazine or optional 30-position tool magazine, with tool change time between adjacent tools less than 5 seconds.
8. The equipment is equipped with a tricolor indicator light, installed at the front of the operating panel, clearly visible at each position.
9. The equipment's electrical control cabinet is equipped with a convection heat dissipation device for effective heat exchange.
10. Machine tool and fixture operation buttons are set on the external operation panel, allowing operators to perform operations externally after installing the workpiece. The equipment features a safety interlock function (in automatic mode).
11. The equipment's operation buttons have waterproof function (start, pause, emergency stop, safety door start, close), with a cabinet-style movable operation panel.
12. The machine tool has axis travel limit alarm function to prevent equipment damage.
13. All circuits must have wire number identification.
14. The machine tool structure is designed with sufficient static, dynamic, and thermal stiffness and can adopt mature advanced technology to ensure the system has good dynamic quality and long-term stable continuous high-speed processing. The selected servo drive system has high precision, good reliability, and fast response speed; X-axis adopts precision rack and pinion drive for high-speed operation, and precision ball screw drive can be selected for higher accuracy. Y-axis and Z-axis adopt precision ball screw drive.
15. The tool magazine allows for random tool selection and tool change, with the ability to set tool size and pre-select tools.
16. The equipment base has adjustable leveling feet for convenient overall equipment leveling adjustment.
17. The safety door of this machine tool has a door-machine interlock safety function; the door opening and closing adopt manual folding sliding doors, with an opening larger than 2 meters for easy operation. Observation windows are installed on the doors, with steel grating protection. The machine features full-cover sheet metal, energy-saving LED lighting, and additional safety interlocks.
18. This machine tool is designed and manufactured in accordance with international industrial standards (ISO) and international electrical standards (IEC), and complies with relevant national standards (GB, GB/T). The design philosophy and structure of the machine tool are subject to the manufacturer.
){kind=link}